Satellite TV signals have really made a difference in many people’s lives. Now
Mount Satellite on Siding of Your Home – Holes in Your Walls
If your home has vinyl siding or aluminum siding on it, you are going to have to drill holes into the wall. This to allow anchors in studs in the walls. This is the only way you will be able to get a solid anchor. Of course now you have a hole in the wall were each anchor bolt penetrated. If you have a professional doing the installation, they will automatically use a sealant. They use the sealant to seal these holes to prevent moisture and insects from getting in. Do it your self installations can be done equally well. However you need to make sure these holes are in fact sealed, otherwise you are just inviting more problems later.
Clear Line of Site to the Satellite
Each installation location must have a clear line of site to the satellite for the system to work properly. Many times this means that you need to mount the satellite dish on the side of your home. Brick walls are preferred for mounting.
Line of site is critical both when you do the installation. Many people install satellite dishes in the late fall or winter time when there are no leaves on the trees. The system works well, the TV pictures are clear etc.. But then spring roles around and suddenly our TV receptions is gone or intermittent at best. Other situations arise later when the dish is installed. A few years later a tree or high shrub has grown taller and suddenly we have bad TV reception.
If you are going to mount the satellite dish on the siding of your home, make sure it is well secured. Make sure the holes are sealed. Make sure that no trees or shrubs are going to grow into your line of site. Other wise you have to cut or trim the tree or move your dish to a different location. Now you have old unsightly holes in your wall as well as holes in a new location.
Give it some thought before you mount satellite dishes on the siding of your home. For more thoughts and ideas about mounting satellite dishes, click here.
Save