Steps for Stain Removal from Fences & Decks
Here are the steps to follow and we will add a few comments at the end to emphasize some of the steps in more detail.
- Move furniture away from the work area
- Remove debris such as leaves and dirt
- Remove all loose paint or stain
- Protect any areas such as walls and shrubbery
- Apply stain remover
- Allow to soak for 5 to 45 minutes
- Remove old stain by washing with a garden hose or pressure washer
- Scrape any remaining loose stain
- Re-apply stain remover and wash again if needed
- Allow to dry for at least 24 hours
- Sand exposed wood to remove any roughness, splinters etc
- Apply new stain as needed.
If you decide to use a pressure washer, hold the end of the nozzle at least one foot away and adjust the sprayer to its widest setting to avoid gauging the wood and causing more damage. A pressure washer can do a lot of damage quickly so experiment on a test piece first if this is the first time you are using one.
Allow the deck to dry at least 24 hours after cleaning. You want the wood nice and dry prior to sanding. Sand all of the rough edges and the flooring to ensure that it is smooth and there is no chance of slivers for anyone walking across it on bare feet. Once you have competed this stop you are ready to apply the new stain. Ensure that you have dry weather for another 24 hours to allow the new stain to dry properly.
Save