Dryer Vent Ice DamIf you are having dryer vent ice dams or moisture forming under cold dryer vents, you should make repairs immediately. All of this moisture dripping on to the floor or the wall is going to cause deterioration of the wood through rotting and worse. Mold can cause health issues. We will discuss how these situations occur and what the solution is for a situation like this. Starting with this pipe shown in the picture which is the worst pipe that can be used for a dryer vent that exits to the outside.

Dryer Vent Ice Dam – How does it Happen

Basically warm moist air flowing through a cold pipe is going to cool quickly causing moisture to condense on the side of the pipe. It then run to the bottom of the pipe and drip out of the joints in this particular pipe. If it is cold enough on the outside of the pipe the water will freeze and them melt later when the weather warms up. This water can cause extensive damage to underlying floors and walls including rotting wood and mold. If it is cold enough the moisture can actually freeze in the pipe causing an ice dam inside the pipe as well as outside.

Dryer Vent Ice Dam – Solution

Change the pipe to a single continuous pipe with no joints or seams. If there is a seam along the length of the pipe, make sure you install it with the seam on the top. In addition surround this pipe with insulation so that the pipe is kept relatively warm and avoids freezing the moisture in the dryer exhaust.

Any time you have icicles on your roof or forming from a dryer vent, there is a problem somewhere. Homeowners need to pay attention to these kind of issues immediately to avoid much more expensive repairs in the future.